17861779-10212477831601583-7859260358294795216-n400dpilogo17903404-775283462640929-8619991932783324517-n                                                                               

Webshop » -MOTUL » MOTUL 300V Power Racing 5W30 2L

MOTUL 300V Power Racing 5W30 2L

103128 MOTUL 300V Power Racing 5W30  2L

€ 37,43 inclusief BTW

Aantal  
Hoogpresterende synthetische olie voor motoren waarbij direct het maximum aan vermogen geëist wordt. De 5W30 graad geeft een goeie oliecirculatie en onmiddellijke opbouw van de oliedruk. Vooral geschikt voor kwalificatieritten, klimkoersen, drag racing, Nascar, ...
Viscositeit: 5W30
Normering: Overtreft de bestaande ACEA- en API-classificaties.
Toepassing
  Competitie/Rally
Type
  Motorolie


2 Liter verpakking

300V Power Racing
5W-30
Racing lubricant for Motorsports
100% Synthetic – E Technology
TYPE OF USE
All racing gasoline or diesel engines, naturally aspirated or turbocharged fitted with injection (direct /
indirect) or carburetted.
For race prepared engines operating over a wide range of rpm and temperatures.
PERFORMANCES
STANDARDS Above existing Motorsport standards.
TYPE OF USE Rally – Short distance race
The SAE 5W-30 viscosity allows excellent oil flow into the engine at start-up and fast oil pressure
establishment while guaranteeing at hot temperature high oil pressure and faster engine revving.
E TECHNOLOGY
For decades MOTUL has developed high performance synthetic Ester based lubricants.
By selecting esters over other high performance synthetic base stocks and combining them with an
innovative additive package, MOTUL has created a perfect synergy.
This most advanced E technology allows maximum power output of the engine without
compromising reliability and wear.
ADVANTAGES
The SAE 5W-30 viscosity enables to compensate medium engine oil dilution by unburned fuel.
Maximum oil film resistance at very high temperature: Engine wear is reduced.
Friction Modifier: Maximum power output, decrease operating temperature.
Low volatility: Oil consumption is reduced.
High shear stability: Stable oil pressure whatever using conditions.
RECOMMENDATIONS
For optimal engine performances avoid mixing with other synthetic or mineral lubricants.
Oil change: According to your own use.

PROPERTIES
Viscosity grade SAE J 300 SAE 5W-30
Density at 20°C (68°F) ASTM D1298 0.859
Viscosity at 40°C (104°F) ASTM D445 64.0 mm²/s
Viscosity at 100°C (212°F) ASTM D445 11.0 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 3.5 mPa.s
Viscosity index ASTM D2270 165
Pour point ASTM D97 -48°C / -54.4°F
Flash point ASTM D92 232°C / 449.6°F
TBN ASTM D2896 7.97 mg KOH/g